AM Science

AM Science

113 Following Show all

Rapid.Tech 3D 2024
Rapid.Tech 3D 2024 Rapid.Tech 3D

Posts - that's to be discovered on the topic (23)

Rapid.Tech 3D
Press release

Spotlight on the entire AM chain

AM Science by Fraunhofer Forum at Rapid.Tech 3D on 16 May. At Rapid.Tech 3D 2024, the Fraunhofer Competence Field Additive Manufacturing will highlight the services it provides by means of an oversized hand.
Rapid.Tech 3D
Press release

3D printing: catalyst for the energy and transport transitions

The potential of additive manufacturing for energy and hydrogen technologies will be discussed at the Innovations in Additive Manufacturing forum on 16 May 2024 at Rapid.Tech 3D
FIT AG Hall 2 / 2-410
Service-Highlight

Free FIT guides make fit for the world of AM

In a survey conducted by Vogel Communications, 560 companies were asked why they are not yet using additive manufacturing. For 42.2% of them, it was because they lacked the necessary know-how. The FIT-AM experts are therefore publishing a series of practice-oriented guides.
TITK - Thüringisches Institut für Textil- und Kunststoff-Forschung e.V. Hall 2 / 2-223
Open Positions

Project Engineer (m/f/d) Additive Manufacturing (3D printing)

Are you enthusiastic about versatile activities in industrial, application-oriented research? Do you want to drive forward development in the exciting and rapidly evolving field of additive manufacturing (3D printing)?
iSQUARED AG Hall 2 / 2-204
Service-Highlight

Customized material development - We develop materials according to your individual requirements

Standard materials do not always meet your individual requirements. Tailored to your individual material requirements, our teams of chemists and 3D printing experts develop FDM or PolyJet materials.
Hermle Maschinenbau GmbH Hall 2 / 2-602
Novelty

News from additive manufacturing!

Discover the revolutionary potential of our MPA technology in the additive manufacturing of multi-material components. Our innovative process makes it possible for a component to combine different materials, each of which fulfills a unique purpose.
Rapid.Tech 3D
Press release

Electronic clothes, renewable bones, printed houses

20th Rapid.Tech 3D showcases the present and future of 3D printing. The 20th anniversary event opens its doors tomorrow. The pioneering additive manufacturing event is back at Erfurt for the 20th time.
GMBU e.V. Hall 2 / 2-400
Use Case / Showcase

Biogenic filaments and composite materials with mineral or vegetable fillers

Plants or minerals left over, but no idea what to do with them? Composites and filaments with natural fillers are in great demand in additive manufacturing. Hassle-free 3D printing with a natural look and feel of the end product is what characterizes a top product - talk to us!
ALTANA New Technologies GmbH - Cubic Ink® Hall 2 / 2-411
Product-Highlight

Quality without compromise

Cubic Ink® - a brand of ALTANA New Technologies GmbH - develops standard materials for DLP, LCD and SLA applications as well as customised material solutions specifically for material jetting and special materials for a wide range of industries.
SmarAct Hall 2 / 2-515
Specialist Knowledge

Highest Precision with Direct Drives

The insider tip among drive technologies: Direct drives impress with their high speeds and excellent repeatability - even after hundreds of kilometers. Get the best out of your 3D printer.
Rapid.Tech 3D 2024
Rapid.Tech 3D 2024 Rapid.Tech 3D

Events (7)

AM Science Forum by Fraunhofer

May 16, 2024 10:05 AM - 10:35 AM | CongressCenter, Panoramasaal, 3 OG

An unconventional Approach to Programming of a Shape Memory Polymer
AM Science Forum by Fraunhofer

May 16, 2024 10:35 AM - 11:05 AM | CongressCenter, Panoramasaal, 3 OG

Development and evaluation of an automated design and binder jetting process for individual finger joint implants
AM Science Forum by Fraunhofer

May 16, 2024 11:35 AM - 12:05 PM | CongressCenter, Panoramasaal, 3 OG

Novel Voronoi-based Scanning Strategies Combined with Field-driven Geometry Analysis
AM Science Forum by Fraunhofer

May 16, 2024 12:05 PM - 12:35 PM | CongressCenter, Panoramasaal, 3 OG

Transition zone parameter development in multi-material powder bed fusion: A general approach
AM Science Forum by Fraunhofer

May 16, 2024 1:35 PM - 2:05 PM | CongressCenter, Panoramasaal, 3 OG

AI-based defect detection for LPBF
AM Science Forum by Fraunhofer

May 16, 2024 2:05 PM - 2:35 PM | CongressCenter, Panoramasaal, 3 OG

Alternative AM processes for the production of non-weldable materials
Rapid.Tech 3D 2024
Rapid.Tech 3D 2024 Rapid.Tech 3D

Past events (16)

AM Science forum

May 15, 2024 4:30 PM - 5:00 PM | CongressCenter, Panoramasaal, 3. OG

Camera-based measurement and control of the contact tip to work distance in wire arc additive manufacturing
AM Science forum

May 15, 2024 4:00 PM - 4:30 PM | CongressCenter, Panoramasaal, 3. OG

Influence of arc oscillation frequencies on the surface of DED-Arc manufactured Ti-6Al-4V structures
AM Science forum

May 15, 2024 3:00 PM - 3:30 PM | CongressCenter, Panoramasaal, 3. OG

Temperature control by simulated adaptive layer times in powder bed fusion processes
AM Science forum

May 15, 2024 2:30 PM - 3:00 PM | CongressCenter, Panoramasaal, 3. OG

Empirical calibration method for the thermal simulation of Cu47Ti34Zr11Ni8 single tracks in laser powder bed fusion
AM Science forum

May 15, 2024 2:00 PM - 2:30 PM | CongressCenter, Panoramasaal, 3. OG

Optimizing energy modeling in SLM metal additive manufacturing: A detailed analysis of resource
AM Science forum

May 15, 2024 12:15 PM - 12:45 PM | CongressCenter, Panoramasaal, 3. OG

Surface treatment of additively manufactured high-alloy austenitic steel parts with the aim to prolong fatigue life
Rapid.Tech 3D 2024
Rapid.Tech 3D 2024 Rapid.Tech 3D

Providers (13)

FIT AG

We are a globally renowned specialist in additive design and additive manufacturing. As a technology leader, we have been achieving proven success from design to manufacturing, for our customers for over 25 years. Like this, you are always one step ahead of your competitors.

Hall 2 / 2-410

3D Systems GmbH

3D Systems launched the 3D printing industry in 1986 and has been leading AM innovation ever since. Our broad portfolio of hardware, software, and material solutions spans from plastics to metals, and is backed by industry-specific engineering expertise housed in our Applications Innovation Group.

Hall 2 / 2-401

Rapid.Tech 3D

Die Rapid.Tech 3D ist die zukunftsweisende Pionierveranstaltung der AM-Szene in der Messe Erfurt und feiert ihre 20. Auflage: 14. bis 16. Mai 2024. Das Event bietet einen erfolgreichen Dreiklang aus Fachkongress, Ausstellung und Netzwerkmöglichkeiten für die AM Industrie.

ALTANA New Technologies GmbH - Cubic Ink®

We give shape to ideas- ALTANA Cubic Ink® High Performance Materials suitable for DLP, LCD, SLA and Material Jetting- Fulfilling customer wishes, thinking ahead, or even exceeding customer requirements: with this aspiration, ALTANA offers innovative 3D printing materials for additive manufacturing.

Hall 2 / 2-411

SmarAct

Your partner for high precision in positioning, automation and metrology.

Hall 2 / 2-515

Hermle Maschinenbau GmbH

Hermle Maschinenbau GmbH (HMG), based in Ottobrunn near Munich, is a subsidiary of Maschinenfabrik Berthold HERMLE AG. The company focuses on the further development of HERMLE MPA technology and the production of customer projects as a service.

Hall 2 / 2-602

iSQUARED AG

Welcome to the Additive Manufacturing Material Marketplace, where we specialize in the development and production of high-quality 3D printing refill materials of various technologies, as well as the refurbishment of used Stratasys 3D printers for resale.

Hall 2 / 2-204

TITK - Thüringisches Institut für Textil- und Kunststoff-Forschung e.V.

Das TITK - Thüringisches Institut für Textil- und Kunststoff-Forschung Rudolstadt - www.titk.de – ist eines der führenden privaten Materialforschungsinstitute auf dem Gebiet der Funktions- und Konstruktionswerkstoffe auf Polymerbasis.

Hall 2 / 2-223

Fraunhofer Kompetenzfeld Additive Fertigung

All about Additive Manufacturing

Hall 2 / 2-111